Do it PLASMA !

尖端 · 智能 · 人性化

首页    焊接工艺    等离子堆焊    PMI – 350 TL 等离子多功能逆变焊机
350
穿孔3
穿孔2
穿孔
500穿孔4
500穿孔3
500穿孔2
500穿孔

PMI – 350 TL 等离子多功能逆变焊机

多功能等离子焊接设备-焊接厚度达6毫米的薄板的理想解决方案。

 

PMI – 350 TL 等离子多功能逆变焊机

Multifunctional device – The ideal solution for welding thin sheets up to ~6mm thick.

多功能等离子焊接设备-焊接厚度达6毫米的薄板的理想解决方案。

TECHNICAL DETAILS 技术细节

The electric arc is constricted by a cupper nozzle, which causes a higher power density. The concentrated electric arc can be achieved in conjunction with the controllable able gas, higher welding speeds and a deeper penetration, which saves time and money. The tight bundling of the electric arc and the welding speed causes only a narrow heat-effected zone to form, which has a lower thermal distortion in the component result.

电弧因铜喷嘴集聚,产生高功率密度。 稳定集聚的电弧、数显可控的等离子气体、智能高速的焊接速度、理想化的熔深、极大节省了时间和金钱。 集聚的电弧和焊接速度能够形成一个狭窄的热影响区,从而使工件热变形较小。

技术规格 Technical Specifications PMI – 350 TL
主电压 main voltage 3x400V AC ± 15% 50 / 60 Hz
电源连接 power connection 4 x 32A CEE plug, 6 mm²
焊接电流(60% ED) welding current (60% ED) 320A
焊接电流(100% ED) welding current (100% ED) 290A
控制范围 control range 3 ÷ 350A
空载电压 idle voltage 95V
引弧电流(100% ED) pilot current (100% ED) 30A
引弧电流控制范围 control range pilot current 0,5 – 50A
防护等级 degree of protection IP 21 S
手动等离子气体控制 manual plasma control 0,2 ÷ 2,5 l Ar/min
手动保护气体控制 manual protection gas control 1,0 ÷ 25,0 l Ar/min
脉冲频率 pulse rate 0,1 – 3300Hz
脉冲占空比 pulse balance 1 – 99%
脉冲断流 pulse break current 10 – 100%
脉冲时间 pulse time 0,15 – 3000 ms
断流时间 break time 0,15 – 3000 ms
断流 break current 5 – 350A
重量 weight 105 kg
尺寸 dimensions 1200x520x940 mm

Option:
PGR-05: electr. Plasma control, range 0,1 ÷ 5 l/min
SGR-20: electr. Inert gas control, range 0,5 ÷ 20 l/min
MCC: Motor Control Card to drive from an SBI wire case

  • high quality of seam 高质量焊缝
  • high process safety 高安全系数
  • high degree of automation 高度自动化
  • high productivity due to high welding speed 高焊接速度实现高生产率

APPLICATIONS 应用:

The soft plasma welding machine is used for sheets up to 6mm. Plasma welding is mainly used for the following materials: stainless steel, steel, titanium, zirconium and copper.

此款等离子焊机用于最大6mm的板材。等离子焊接主要用于以下材料:不锈钢,钢,钛,锆和铜。