PSW – 500 TL 等离子多功能点焊焊机
PSW – 500 TL 等离子多功能点焊焊机
Multifunctional device – the ideal solution for welding sheets up to ~3,5mm thick (upper sheet metal).
多功能等离子焊接设备–焊接厚度约3.5mm（上层金属薄板）的理想解决方案。
TECHNICAL DETAILS技术细节
The focused electric arc provides high power density and accurate positioning to a spot weld, resulting in low welding times. The strong bundling of the electric arc and the short welding time causes only a small heat-effected zone to form, which has a lower thermal distortion in the component result.
聚焦电弧可提供高功率密度并精确定位以实现点焊，从而缩短焊接时间。强大的电弧能量束和短暂的焊接时间，仅形成一个小热影响区，从而使零件具有较低的热变形。
| 技术规格 | Technical Specifications | PSW – 500 TL |
|---|---|---|
| 电源电压 | supply voltage | 3x400V AC ± 15% 50 / 60 Hz |
| 电源连接 | power connection | 4 x 32A CEE plug, 6 mm² |
| 焊接电流（60％ED） | welding current (60% ED) | 380A |
| 焊接电流（100％ED） | welding current (100% ED) | 300A |
| 控制范围 | control range | 5 ÷ 500A |
| 空载电压 | idle voltage | 75V |
| 引弧电流（100％ED） | pilot current (100% ED) | 30A |
| 引弧电流控制范围 | control range pilot current | 0,5 – 50A |
| 防护等级 | degree of protection | IP 21 S |
| 手动等离子气体控制 | manual plasma control | 0,2 ÷ 2,5 l Ar/min |
| 手动保护气体控制 | manual protection gas control | 1,0 ÷ 25,0 l Ar/min |
| 脉冲频率 | pulse rate | 0,1 – 1000Hz |
| 脉冲占空比 | pulse balance | 1 – 99% |
| 脉冲断流 | pulse break current | 10 – 100% |
| 脉冲时间 | pulse time | 1 – 3000 ms |
| 断流时间 | break time | 1 – 3000 ms |
| 断流 | break current | 5 – 500A |
| 重量 | weight | 115 kg |
| 尺寸 | dimensions | 1200 x 520 x 940mm |
Option:
PGR-05: electr. Plasma control, range 0,1 ÷ 5 l/min
SGR-20: electr. Inert gas control, range 0,5 ÷ 20 l/min
MCC: Motor Control Card to drive from an SBI wire case
- high quality of the seam高质量焊缝
- high process saftey高安全系数
- high degree of automation高度自动化
- high productivity due to high welding speed高焊接速度实现高生产率
APPLICATION 应用:
The plasma spot welding machine is used for sheets up to 3,5mm thick (upper sheet metal). The main materials used for plasma spot welding are stainless steel, steel, titanium, zirconium and copper.
等离子点焊焊机用于厚度不超过3.5mm的薄板（上层金属薄板）。等离子点焊的主要材料是不锈钢，钢，钛，锆和铜。
